- 【Wide Compatibility】 Wireless gaming controller is widely compatible with PS4/ PS4 Pro/ PC (Win7/8/8.1/10), Android 5.0 and above, IOS13.0 and above, can support all software version of P4 game series. (Note: Please activate device with the USB cable for the first match connection)
- 【Wireless controller】 With High-precisive Wireless Bluetooth 4.2 version connection technology, the connection distance can reach up 10M, which offer steady singnal and strong anti-interferance, without any delay, make your gaming more fluently
- 【Ergonomic Design】 This PS4 controller is highly sensitivity with Vibration motion sensor, can offer quick response time and improved accuracy at critical moments. Give gramer control the game completely and feel endless gameplay exciting. The layout of the controller buttons is optimized with an excellent dual analog gamepad design
- 【Dual Shock Function】 The PS4 controller has built-in dual shock motion motors, gives you different intensity feedback and more authentic game experience. Add 3.5mm TRRS audio port and don’t worry about disturbing others. There is sharing button for you to share your game video and screenshots
Voltage: 110V / 60Hz / 700W
Nozzle size: 0.5, 1.0, 1.2, 1.5, 2.5mm
Capacity: 800 ml
Power cord: 2.5m/8.2Ft
How to exchange the nozzle core?
1.Carefully remove trigger from assembly by pulling it down and off. Turn it sightly then pull nozzle tip out.
NOTE: Take the nozzle core out until the trigger is remove.The nozzle tip has spring on the end so take care not to lose it.
2.Choosing the right spray tip and nozzle.
3.Put nozzle core and spring in.Make sure the trigger is locked in correct place.
4.Install the nozzle,air cap and locking nut.
How to prevent the nozzles from clogging ?
1.Make sure deep clean every part immediately after use. Do not leave the paint halfway,the paint will be dry.Please clean it up.
2.Dilute the thick paint before painting.Recommended painting viscosity from 20 Din-s to 40 Din-s.
NOTE: Please use a respirator or mask when using the sprayer.
Three different spray modes:
Choose the spray pattern by turning the nozzle.Adjustable patterns make the Spray easy to use to get the desired results.
0.5mm/1.0mm/1.2mm/1.5mm/2.5mm for any painting projects.
0.5mm nozzle suit for disinfectant.
1.0 & 1.2mm for sealer and varnish.
1.5mm for oil based paints, stains, polyurethane, etc.
2.5mm is great for latex paint,chalk type paint…etc.
Thinning may be necessary and you should do so based on the paint manufacturer’s guidelines.